All Accessories.
Replacement parts, solar wiring, SunCase add-ons, restricted-issue gear, fleet tracking and battery chargers — the full New Use Energy support catalog in one place.
Buyer’s Guide
SunCase™ Accessories & Solar Wiring: The Complete Guide
Cables, chargers, extension runs, mobility kits and fleet tools that turn a SunCase™ power station into a complete, field-ready system — and how to choose the right one for your model.
Quick Answer
New Use Energy accessories fall into four groups: charging cables (AC wall, solar/DC, and vehicle/battery), solar wiring (PV extension cables, Y-cables, array cases, magnets), mobility & protection (big wheel kit, fan covers, thermal carry), and fleet tools (GPS device tracking and 12–72V chargers). The correct solar cable depends on your model — the SunCase 605 and 1213 use an XT60-to-MC4 lead, while the 2425 and 3651 use an Anderson SB-to-MC4 lead.
4SunCase™ models supported
10–100ftPV extension cable runs
12–72VLithium charger range
1000VDirect-burial PV wire rating
A portable power station is only as capable as the cables, mounts and tools that connect it to the real world. The right accessory lets you charge from a wall, a vehicle or the sun; place a solar array where the light actually is; roll a heavy unit across rough ground; and keep a whole fleet visible from one dashboard. This guide breaks down every New Use Energy accessory category and answers the questions buyers ask most.
What accessories does a SunCase™ need?
Most SunCase owners need three things to start: a charging cable matched to their model, a way to connect solar, and — for larger units — a mobility or carry solution. Everything else is mission-specific.
New Use Energy organizes its accessory ecosystem into four practical categories:
- Charging cables — AC wall-charging leads, solar/DC input cables, and vehicle/stationary battery charging kits with alligator clips.
- Solar wiring — professional-grade PV extension cables, Y-cables for linking panels in parallel, transport cases for NUESolar™ arrays, and mounting magnets.
- Mobility & protection — the Big Wheel Kit for the SunCase 3651, replacement fan covers with washable filters, and restricted-issue thermal carry systems.
- Fleet & power — GPS device tracking, external lithium chargers from 12V to 72V, and sunlight-readable display screens.
Which charging cable do I need for my SunCase™?
It depends on the model. The SunCase 605 and 1213 share one AC and one solar/DC cable set; the 2425 and 3651 share another. The solar connector differs: XT60-to-MC4 on the smaller units, Anderson SB-to-MC4 on the larger ones.
Use the compatibility table below to match your unit. AC cables charge from any standard wall outlet, while solar/DC cables accept input from NUESolar™ panels or a 12V source.
| SunCase™ Model | AC Charging Cable | Solar / DC Cable | Interconnection |
|---|---|---|---|
| 605 | 605 / 1213 AC lead | XT60 → MC4 (2 ft) | — |
| 1213 | 605 / 1213 AC lead | XT60 → MC4 (2 ft) | — |
| 2425 | 2425 / 3651 AC lead | Anderson SB → MC4 (3 ft) | — |
| 3651 | 2425 / 3651 AC lead | Anderson SB → MC4 (3 ft) | SB50 ↔ SB50, 6 AWG |
Need to charge directly from a vehicle or a spare battery bank? The Vehicle / Stationary Battery Charging Kit connects to the 605, 1213 or 2425 with a 6-foot cable and alligator clips — ideal for topping up from a truck, boat or off-grid bank.
What are PV extension cables, and what length should I buy?
PV extension cables are pre-terminated solar leads that let you place your panels away from your power station. New Use Energy offers professional-grade 10 AWG cables with MC4 connectors on both ends, rated to 1000V and direct-burial, in 10, 30, 50 and 100-foot lengths.
Choosing a length is about reach versus efficiency. Longer runs give you freedom to chase the sun, but every extra foot of wire adds a small amount of voltage drop. A few rules of thumb:
- Pick the shortest run that reaches your ideal panel placement — don’t coil 100 ft when 30 ft will do.
- Heavy 10 AWG copper keeps voltage drop low even on longer pulls, which protects charging speed.
- Cables are sold as a red + black pair with MC4 connectors that mate directly to NUESolar™ panels.
- The 1000V, direct-burial rating means they hold up to permanent and semi-permanent installs, not just temporary setups.
Explore the full NUESolar™ panel lineup to pair the right array with your run length.
How do I move and protect a SunCase™ in the field?
For the 3651, the Big Wheel Kit adds all-terrain wheels and a telescoping handle so 100+ lbs of power rolls like luggage. Replacement fan covers keep dust out of the cooling system, and restricted-issue thermal carry systems are available to vetted buyers.
Big Wheel Kit (SunCase 3651)
The kit turns the rugged SunCase 3651 into a roll-anywhere power cart — one person can move it across gravel, grass and curbs without a second set of hands.
Replacement fan covers
Fan covers combine a protective guard with a washable filter and are field-swappable, so you can keep intake and exhaust clear in dusty or high-debris environments without sending the unit in for service.
Thermal carry (restricted)
Thermal bags and backpacks that manage the heat signature of a powered SunCase 605 or 1213 are a controlled, restricted-sale item. Because of the sensitive nature of the technology, buyers must be vetted and approved — contact New Use Energy to start that process.
How do I track and manage a fleet of SunCases?
New Use Energy offers GPS device tracking that shows the live location, state-of-charge and status of every deployed SunCase from a single web dashboard, with geofencing alerts and CSV/API export for larger fleets.
For rental operators, emergency managers and government fleets, knowing where every unit is — and how much charge it has — turns a pile of power stations into a managed asset base. Learn more on the Device Tracking page.
Key takeaways
- Match your charging cable to your model: 605/1213 use XT60-to-MC4; 2425/3651 use Anderson SB-to-MC4.
- Only the SunCase 3651 supports daisy-chaining, via a 6 AWG SB50-to-SB50 interconnection cable.
- Buy the shortest PV extension run that reaches; 10 AWG keeps voltage drop low on long pulls.
- Thermal carry systems are restricted and require buyer vetting.
- GPS tracking is the fastest way to manage and secure a multi-unit fleet.
Frequently asked questions
What cable charges a SunCase from a wall outlet?
Each SunCase ships with an AC charging cable matched to its model — one lead covers the 605 and 1213, and another covers the 2425 and 3651. Replacement AC charging cables are available if yours is lost or damaged.
Can I charge a SunCase from my vehicle or a battery bank?
Yes. The Vehicle / Stationary Battery Charging Kit connects to the 605, 1213 or 2425 with a 6-foot cable and alligator clips, letting you charge directly from a vehicle, boat or off-grid battery bank.
What size solar extension cable do I need?
New Use Energy PV extension cables are 10 AWG with MC4 connectors on both ends, rated to 1000V and direct-burial. Choose the shortest length — 10, 30, 50 or 100 ft — that reaches your ideal panel placement to minimize voltage drop.
Are SunCase accessories compatible across models?
Some are shared and some are model-specific. AC and solar/DC cables are grouped by model pair (605/1213 and 2425/3651), the Big Wheel Kit is built for the 3651, and thermal carry systems fit the 605 and 1213.
Why are the thermal carry systems restricted?
The thermal bags and backpacks manage the heat signature of a powered SunCase, which is sensitive technology. For that reason they are a restricted-sale item, and individuals and organizations must be vetted and approved before purchase.
Can I daisy-chain multiple SunCase 3651 units?
Yes. The SunCase 3651 supports daisy-chaining through a dedicated interconnection cable using SB50-to-SB50 connectors and 6 AWG wire, allowing multiple units to be linked together.